...
×

Leave Your Message

       

Metric Double Ended Wheel Nut Wrench – 21–32 mm

Cr-V wheel nut wrenches with two metric socket ends and transverse bar holes. Listed size pairs cover 21–32 mm openings; the photographed versions have a black finish.

Product Detail

Double ended wheel nut wrench: Product Overview

A double ended wheel nut wrench places two metric socket sizes on one straight body. This family lists 21 × 24, 22 × 24, 24 × 27, 27 × 30 and 30 × 32 mm pairs. Chromium vanadium steel appears in the product specification. The images show black-finished versions with transverse holes for a turning bar. Select the pair that matches the intended fasteners, then confirm the body dimensions and finish. The group photograph illustrates available choices rather than a fixed three-tool package.

Understand the paired sizes

Each pair describes the two working openings on one wrench. For example, 24 × 27 mm means a 24 mm socket at one end and a 27 mm socket at the other. It does not describe a continuously adjustable opening. Choosing the right pair can reduce the number of separate tools needed for a known group of fasteners. However, do not substitute a near size for an exact fit. Check the nut specification before deciding which listed combination belongs in your kit.

Double ended wheel nut wrench geometry

The straight body separates the two socket ends and provides cross holes for manual turning with a suitable bar. Socket depth and outside diameter remain important when the nut sits inside a wheel recess. Ask for those measurements if clearance is limited. The overall length also affects how the tool fits into a storage compartment. A simple outline in a photograph cannot confirm all these dimensions, so record the required limits when comparing this wrench with an existing service tool.

Cr-V construction and finish choices

The product specification identifies chromium vanadium steel. Although the broader product family also mentions chrome plating, the product photographs selected here show a dark finish. Your order should identify the surface treatment you actually require. This keeps the delivered appearance consistent with your catalog. If you need a different coating, confirm its availability before approval. Material and finish are separate choices, and neither a bright nor a black surface alone establishes the permitted working force of the selected tool.

Manual turning with the correct bar

Choose a bar that fits the intended transverse hole and operating arrangement. Confirm whether it ships with the wrench or forms a separate item. Seat the socket fully on the fastener before applying force, and check the bar’s turning path around nearby parts. This tool is described for manual operation. Do not treat its tubular socket as a square-drive impact accessory. A complete wheel-service kit may need separate tools for initial movement, controlled final tightening and checking the completed installation.

Plan your metric wrench assortment

For a distributor, paired sizes make a catalog easier to organize around common local vehicle requirements. Begin with the nut sizes your customers use, then choose combinations that avoid unnecessary overlap. List quantities by pair rather than giving one total for mixed wrenches. You can compare other layouts in the Wheel Nut Wrench. Keep straight double-ended tools distinct from L-shaped and cross-shaped wrenches, since their access and storage arrangements differ even when the opening sizes match.

Wheel-service checks and care

Follow the vehicle maker’s procedure and support the vehicle correctly before wheel work. Use the exact socket size and keep it fully engaged with the nut. Apply controlled manual force without adding improvised pipe extensions. For reinstallation, follow the specified tightening sequence and use an appropriate torque tool where the procedure requires it. Clean the wrench after use, including both openings and the bar holes. Inspect for cracked walls, rounded corners or distortion before placing it back in the kit.

Request the required size combination

Send Wild King the selected double ended wheel nut wrench pairs, quantities and desired finish. Include any limits on overall length, socket depth or outside diameter, plus the required bar arrangement. If you are matching an existing vehicle tool kit, provide its available storage dimensions. Confirm the exact material, pair list and included components against the final quotation. This keeps the supplied tools aligned with both the fastener requirements and the product descriptions you will show to customers.

Key Features

Five listed metric pairs help you choose around known fasteners. A straight body and bar holes provide the manual operating layout.

  • Material: Cr-V steel
  • Size pairs: 21×24, 22×24, 24×27, 27×30, 30×32 mm
  • Layout: Straight double-ended socket wrench

Technical Specifications

Material Cr-V steel
Size pairs 21×24, 22×24, 24×27, 27×30, 30×32 mm
Layout Straight double-ended socket wrench
Operation Manual via transverse bar hole
Photographed finish Black; confirm specified coating
Turning bar Confirm whether included

Design and Connection Details

A kit needing 24 and 27 mm openings can specify the 24 × 27 mm pair rather than ordering an unspecified mixed range.

Selection and Use

Select an exact-fitting end. Check wheel recess clearance and the turning bar. Follow the specified wheel-service sequence.

Order Specification Checklist

For double ended wheel nut wrench, record material, size pairs, layout. Confirm these details, the chosen finish and quantities against the quotation before approving supply.

Suitable Tool Assortments

Vehicle tool kits and manual service assortments using the listed 21–32 mm paired openings.

Configuration Question

Are the photographed tools chrome finished?

The selected photographs show black versions. Confirm the requested coating on the final specification.

Wild King Product Enquiries

Contact Wild King about metric double ended wheel nut wrench – 21–32 mm. Include your required configuration, order quantity and packaging needs so the inquiry can be reviewed against this product range.

Product Image Guide

Metric double ended wheel nut wrench - complete wheel wrench options

Metric Double Ended Wheel Nut Wrench – 21–32 mm. Additional gallery views show the available configurations and connection details.

Before You Order

Cr-V wheel nut wrenches with two metric socket ends and transverse bar holes. Listed size pairs cover 21–32 mm openings; the photographed versions have a black finish.

Request a Product Quote

Send the selected double ended wheel nut wrench specification through the enquiry form below. Include any access or storage dimensions that affect your choice.

Leave Your Message