...
×

Leave Your Message

       

21 × 24 mm Wheel Nut Socket Wrench – 350 mm

A 350 mm manual wheel nut wrench with 21 and 24 mm socket ends. The detailed specification identifies 45# carbon steel; photographs show the silver-finished version.

Product Detail

Wheel nut socket wrench: Product Overview

This wheel nut socket wrench combines 21 and 24 mm socket openings in a straight, double-ended tool. The detailed product specification lists a 350 mm overall length and 45# carbon steel construction. The selected photographs show a silver-finished version, including the socket ends and a transverse hole for manual turning with a suitable bar. This listing focuses on that specific size pair. It gives buyers a clear reference when selecting a replacement tool or completing a vehicle service kit.

A defined 21 × 24 mm pair

The two metric figures refer to the fixed opening at each end. One end fits a 21 mm fastener, while the other fits a 24 mm fastener. Check the required nut size before using either end. The wrench does not adjust between these measurements, and a close size should not replace an exact fit. For a vehicle kit, compare the pair with the vehicle service information. For workshop stock, label the tool by both sizes so users can identify it quickly.

Wheel nut socket wrench dimensions

A 350 mm body gives this version a defined overall format for storage planning and tool comparisons. However, body length does not state socket depth or outside diameter. Those dimensions still matter if the nut sits in a narrow wheel recess or on a projecting stud. Request them when clearance is critical. Also check the space available for a turning bar. A tool may fit inside a storage compartment yet need more room around the wheel during actual operation.

Carbon steel and silver appearance

The detailed specification identifies 45# carbon steel for this model. The photographs selected for this page show a silver surface rather than a black version. Confirm the exact surface treatment in the final quotation if coating consistency matters to your assortment. A bright appearance alone should not be interpreted as stainless steel. Keep material grade, surface finish and dimensions as separate purchasing fields. This makes it easier to compare the supplied item with an existing tool or an agreed sample.

Manual turning through the cross hole

A compatible bar passes through the intended transverse hole to provide leverage. Confirm its fit and the required supply arrangement before ordering. The bar should allow a controlled hand position without striking nearby components. Seat the socket fully on the fastener before applying force, and follow the specification for the selected tool. The wrench is a manual double-ended design. It is not a ratchet, and the socket opening does not form a square-drive connection for a powered impact wrench.

Fit the tool to a known kit requirement

A defined 21 × 24 mm pair can simplify replacement purchasing when the existing vehicle tool uses those same sizes. Record the body length, storage limits and turning-bar arrangement along with the metric pair. If your customers need other pairs or handle shapes, compare the wider Wheel Nut Socket. Keep this 350 mm version distinct in the catalog so its dimensions do not become mixed with similar-looking wrenches from the broader range.

Service checks before and after use

Follow the vehicle manufacturer’s wheel-service procedure and support the vehicle correctly. Inspect both socket ends for rounding, cracks or distortion before fitting the wrench. Apply controlled manual force and avoid extending the turning bar with a pipe. For final installation, follow the specified sequence and use the appropriate torque-checking method. Afterward, wipe the tool clean and remove debris from the openings and cross hole. Store it dry, and investigate any damaged area before returning it to a shared kit.

Request this specific wrench

Tell Wild King that you require the 21 × 24 mm wheel nut socket wrench with a 350 mm overall length. Include the quantity, required finish and whether a matching turning bar must accompany each tool. If socket depth or outside diameter affects the fit, add those limits to the inquiry. Confirm the carbon steel specification and final package contents against the quotation. A clear request keeps the delivered product aligned with the particular pair and body length described on this page.

Key Features

The specified 21 × 24 mm pair and 350 mm length make this a clearly defined replacement option. Both ends provide fixed hexagonal openings.

  • Socket pair: 21 × 24 mm
  • Overall length: 350 mm
  • Specified material: 45# carbon steel

Technical Specifications

Socket pair 21 × 24 mm
Overall length 350 mm
Specified material 45# carbon steel
Photographed appearance Silver; confirm exact surface treatment
Design Straight double-ended manual socket wrench
Turning bar Confirm fit and whether supplied

Design and Connection Details

When replacing a vehicle-supplied wrench, compare the 350 mm body with the available storage space and confirm the bar arrangement.

Selection and Use

Check the required nut size. Seat the matching end and use a compatible turning bar. Inspect both openings after wheel service.

Order Specification Checklist

For wheel nut socket wrench, record socket pair, overall length, specified material. Confirm these details, the chosen finish and quantities against the quotation before approving supply.

Suitable Tool Assortments

Vehicle kits and manual workshop stock requiring this specific 21 × 24 mm, 350 mm format.

Configuration Question

Does the silver appearance mean stainless steel?

No. The detailed specification identifies 45# carbon steel. Confirm the surface treatment separately.

Wild King Product Enquiries

Contact Wild King about 21 × 24 mm wheel nut socket wrench – 350 mm. Include your required configuration, order quantity and packaging needs so the inquiry can be reviewed against this product range.

Product Image Guide

21x24mm wheel nut socket wrench - 350mm complete wrench

21 × 24 mm Wheel Nut Socket Wrench – 350 mm. Additional gallery views show the available configurations and connection details.

Before You Order

A 350 mm manual wheel nut wrench with 21 and 24 mm socket ends. The detailed specification identifies 45# carbon steel; photographs show the silver-finished version.

Request a Product Quote

Send the selected wheel nut socket wrench specification through the enquiry form below. Include any access or storage dimensions that affect your choice.

Leave Your Message