1 Inch Impact Socket – 17–41 mm with Blue Band
1 inch impact socket: Product Overview
Recognize the blue-band design
The blue band makes this socket style easy to recognize in the product photographs. It can also help distinguish this family within a mixed collection. However, the color does not replace a size marking or a drive check. Read the selected opening size before fitting the socket, then confirm the square connection at the tool. When building a retail range, describe the blue band as a visual feature rather than treating it as a universal industry code for material or torque.
1 inch impact socket size selection
The listed 17–41 mm range covers the metric opening options offered for this family. It does not define a supplied set or confirm every intermediate size. Give the required opening sizes and quantities in your inquiry. For a replacement item, compare the worn socket or the fastener specification with the selected version. Also check body length and outside diameter when clearance is limited. These measurements help identify whether the socket can reach the fastener and fit the surrounding space.
Hex opening and retaining details
The working-end photograph shows a hexagonal opening, while the reverse view shows the square drive recess. A transverse hole and a groove appear around the drive end. Match the retention arrangement to the intended tool and use the specified retaining components where required. Confirm those parts separately rather than assuming they ship with every socket. Full engagement matters at both ends of the assembly. The socket must seat on the fastener as well as connect correctly to the drive.
Cr-V construction with a black finish
Chromium vanadium steel appears in the product title and specification. The surface information describes a black phosphate finish, consistent with the dark body shown. Keep the material, coating and drive size together in your item record so similar sockets do not become mixed in purchasing. This page does not assign a torque capacity based on appearance. Review the specification for the selected version and follow the limits of the complete tool assembly, including the drive and any connected accessory.
Use a single-socket range efficiently
Individual size options can help a workshop replace a worn socket or add a missing opening without changing its entire collection. For a distributor, they also allow quantities to follow local demand. Arrange the range by metric size and clearly repeat the 1 inch drive requirement in the catalog. Other body styles and connections appear in the Single Impact Sockets. Compare the actual specifications before combining products under one assortment name or assuming that similar blue bands indicate identical tools.
Before and after the task
Check the hex corners, drive recess and retaining area for wear or visible damage. Fit the socket fully and make sure the connection remains secure before operation. If the opening does not seat properly, stop and check the fastener size rather than forcing the fit. After use, remove dirt from the working end and the drive recess. Keep the socket dry during storage and inspect any damaged coating. A crack, distortion or damaged retention feature requires attention before further service.
Confirm your required version
For a clear quotation, specify a 1 inch impact socket, the metric opening, required quantities and any limits on overall dimensions. Include the intended equipment and retention requirement if those affect compatibility. Wild King can review your requested selection against the available range. The photos illustrate a socket style and its connection details; they do not promise a multi-size kit. Confirm the final opening sizes, material, finish and included retaining parts on the order so your workshop receives the intended configuration.
Key Features
- Confirmed drive: 1 inch square
- Metric opening range: 17–41 mm; confirm individual sizes
- Material: Cr-V steel
Technical Specifications
| Confirmed drive | 1 inch square |
|---|---|
| Metric opening range | 17–41 mm; confirm individual sizes |
| Material | Cr-V steel |
| Finish | Black phosphate body with blue band |
| Working opening | Hexagonal |
| Retention details | Transverse hole and groove shown; confirm required parts |
Design and Connection Details
Selection and Use
Order Specification Checklist
Suitable Tool Assortments
Configuration Question
What is the confirmed square drive?
This listing uses a 1 inch square drive. Select the metric fastener opening separately.
Wild King Product Enquiries
Product Image Guide
1 Inch Impact Socket – 17–41 mm with Blue Band. Additional gallery views show the available configurations and connection details.