...
×

Leave Your Message

       

1/2 Inch Double Ended L Handle – 250 & 300 mm

Chrome-finished L handles with a 1/2 inch square drive at both ends. Listed 250 and 300 mm versions provide two working orientations for compatible manual sockets.

Product Detail

Double ended L handle: Product Overview

A double ended L handle gives a compatible socket two connection points on one bent tool. This family uses a 1/2 inch square drive and offers listed 250 and 300 mm overall lengths. The chrome-finished handles have a long straight arm and a shorter right-angle arm. Connect the socket to the end that gives the more useful working position. The main image shows the two lengths together, while the dimension image explains the drive, shaft and short-arm measurements.

Two ends, two working orientations

Fitting a socket to the short arm places the long arm across the direction of the fastener. In the other orientation, the long arm can reach farther toward the work while the short arm provides a hand position. The best choice depends on the available space and the task. First, check socket engagement and the turning path. Then choose the orientation that allows controlled manual movement without striking nearby parts. The handle has no ratchet mechanism, so repositioning may be necessary.

Compare the 250 and 300 mm versions

The dimension illustration lists 250 and 300 mm lengths, with corresponding short-arm measurements of 40 and 50 mm. It also identifies a 16 mm shaft diameter. These measurements help buyers compare the handle with a storage tray or a restricted access area. However, length should not be the only selection factor. Check the combined depth of the socket and handle end as well. A larger socket body can change clearance even when both handles share the same nominal drive.

Double ended L handle retention

Both square connections show ball retention in the product images. This feature helps locate a compatible socket on the selected end. Before turning, push the socket fully onto the drive and check that it seats correctly. Worn square corners or a damaged retaining part need attention before use. When adding the handle to an existing kit, compare its connection with the sockets already supplied. A 1/2 inch drive description is essential, but the complete assembly should still be checked.

Chrome surface and Cr-V construction

The product information describes chromium vanadium steel with heat treatment and a chrome-plated surface. The bright finish makes the outline and connection details easy to see in the photographs. Keep the surface clean so damage remains visible during inspection. This listing concerns a manual square-drive handle. It should not be confused with a hex key, a Torx key or a powered impact accessory. The actual tool geometry and listed square drive determine how it connects to the socket.

A compact addition to a socket collection

A dual-ended bent handle can offer a useful alternative when a straight bar or bulky ratchet does not suit the available space. For a retail assortment, explain both connection positions with clear images rather than describing the tool only by its overall length. For workshop supply, list the required length beside the drive size. You can compare other manual connections in the Impact Socket Accessories. Keep any additional sockets or extensions separate in the item list unless the order expressly includes them.

Manual use and routine inspection

Use a correctly sized socket on the fastener and keep the assembly aligned with the intended turning direction. Apply a steady manual force within the selected tool specification. Avoid striking the handle or adding an extension pipe to create more leverage. After use, inspect the bend, both square ends and the retaining balls. Remove residue from the drive faces before storage. If the chrome surface is damaged, inspect the underlying area instead of assuming that the mark is only cosmetic.

Specify your preferred configuration

When requesting this double ended L handle, state 1/2 inch drive and the required 250 or 300 mm length. Include quantities for each version if you need both. For a tray or boxed assortment, provide the available storage dimensions and identify the sockets that will accompany the handle. Wild King can review the requested configuration and packaging details. Confirm the final dimensions, material and included items against the quotation so the purchasing record matches the tool your customer expects to receive.

Key Features

Square drives at both ends offer two socket positions on one chrome handle. Choose between the listed 250 and 300 mm versions.

  • Drive: 1/2 inch square at both ends
  • Overall length options: 250 and 300 mm
  • Short-arm dimensions shown: 40 and 50 mm

Technical Specifications

Drive 1/2 inch square at both ends
Overall length options 250 and 300 mm
Short-arm dimensions shown 40 and 50 mm
Shaft diameter shown 16 mm
Material Chromium vanadium steel
Finish Chrome plated
Mechanism Fixed manual L handle with ball retention

Design and Connection Details

Compare the long-arm and short-arm dimensions with a fitted tool tray before selecting the 250 or 300 mm version.

Selection and Use

Pick the end that suits the access space. Fit a 1/2 inch socket fully and check ball retention. Turn manually without an improvised handle extension.

Order Specification Checklist

For double ended L handle, record drive, overall length options, short-arm dimensions shown. Confirm these details, the chosen finish and quantities against the quotation before approving supply.

Suitable Tool Assortments

Manual automotive and general maintenance socket kits using 1/2 inch drive tools.

Configuration Question

Is this an Allen key or a square-drive handle?

It is a square-drive L handle for separate sockets, with a 1/2 inch connection at each end.

Wild King Product Enquiries

Contact Wild King about 1/2 inch double ended l handle – 250 & 300 mm. Include your required configuration, order quantity and packaging needs so the inquiry can be reviewed against this product range.

Product Image Guide

Half inch double ended l handle - 250mm and 300mm handles

1/2 Inch Double Ended L Handle – 250 & 300 mm. Additional gallery views show the available configurations and connection details.

Before You Order

Chrome-finished L handles with a 1/2 inch square drive at both ends. Listed 250 and 300 mm versions provide two working orientations for compatible manual sockets.

Request a Product Quote

Send the selected double ended L handle specification through the enquiry form below. Include any access or storage dimensions that affect your choice.

Leave Your Message