...
×

Leave Your Message

       

Impact Extension Bar – 1/2, 3/4 & 1 Inch, 75–400 mm

Straight socket extension bars with a broad drive and length selection. Choose each combination from the specification table; the family photograph illustrates options rather than a fixed multi-piece set.

Product Detail

Impact extension bar: Product Overview

An impact extension bar adds distance between a socket and its driving tool. This range focuses on a broad selection of lengths from 75 to 400 mm, with choices for 1/2, 3/4 and 1 inch square drives. It gives buyers a way to specify short, medium and longer reach accessories within one product family. The photograph shows several bar profiles and connection sizes. Use the listed drive-specific choices when ordering, because every length is not available in every drive size.

Length choices for each square drive

For 1/2 inch drive, the listed lengths are 75, 125, 250 and 400 mm. The 3/4 inch selection includes 100, 200, 250, 300 and 400 mm. For 1 inch drive, options include 100, 150, 200, 250, 300 and 400 mm. This split matters when building an assortment. A combined range of 75–400 mm does not mean that a 75 mm bar belongs to the 1 inch series. Keep the drive and length together in stock records.

Short reach or more clearance

A compact extension may be enough to clear the edge of a cover or nearby fitting. As a result, it can keep the overall assembly shorter than a long bar would. A deeper recess may instead call for a longer version. Measure the required reach from the socket connection, then consider the socket depth and wrench body. Choose only as much length as the job needs. This makes the working arrangement easier to assess before the tool reaches the fastener.

Impact extension bar end details

The female end accepts the drive, while the male square supports the socket. Close-up photographs show these connection surfaces and the retaining details on selected versions. Depending on the bar, the arrangement can include a ball or a transverse hole. Confirm the exact retention system with the equipment you plan to use. A matching nominal drive size is the starting point, but the complete connection should also seat correctly and retain the socket as intended.

Specify steel and finish clearly

Chromium vanadium, chromium molybdenum and carbon steel options appear in the product information for the broader family. The images show black-finished bars, with black phosphate described in the specification. State the selected material and coating in your purchase request. For powered use, also confirm the intended application and suitable specification for that exact version. Surface color alone cannot identify steel grade or establish a working limit. This is especially relevant when several visually similar accessories share a shelf.

Organize an accessory assortment

A useful assortment starts with drive size, followed by length. For example, separate 1/2 inch bars from 3/4 inch bars before arranging each group from short to long. This helps users recognize the intended connection without comparing every bar side by side. It also helps resellers create accurate order codes. Browse the related Socket Extension Bars when selecting handles or other connections. Each item should retain its own specification even when you supply several accessories together.

Assembly checks and routine care

Push both connections fully home before operating the tool. Next, inspect the assembly for excessive play, damaged corners or a retaining part that does not engage. Keep a straight extension aligned with the intended axis and follow the limits of every connected component. After use, clean the female recess as well as the outside surface. Dirt inside the drive can prevent a complete fit. Store the bars so their male ends do not repeatedly strike hard edges.

Prepare a drive-by-length order list

Send Wild King a separate quantity for each required impact extension bar combination. Include the selected steel, finish and retention requirement alongside the drive and length. If the bars will fit an existing kit, supply the relevant connection details for comparison. The main photograph represents a family of options and does not promise that every pictured item ships together. Confirm your final assortment and packaging against the quotation so purchasing, stock control and customer descriptions all refer to the same products.

Key Features

A broad length selection helps you fill gaps in an existing socket collection. The available choices differ by square drive.

  • Drive sizes: 1/2, 3/4, 1 inch
  • 1/2 inch lengths: 75, 125, 250, 400 mm
  • 3/4 inch lengths: 100, 200, 250, 300, 400 mm

Technical Specifications

Drive sizes 1/2, 3/4, 1 inch
1/2 inch lengths 75, 125, 250, 400 mm
3/4 inch lengths 100, 200, 250, 300, 400 mm
1 inch lengths 100, 150, 200, 250, 300, 400 mm
Shown finish Black phosphate
Material options Confirm selected carbon steel, Cr-V or Cr-Mo version

Design and Connection Details

A compact 1/2 inch setup can start with the listed 75 mm option. A deeper access point may need a longer bar in the same drive family.

Selection and Use

Select a drive-specific length. Check the female and male connections. Confirm the retaining arrangement before use.

Order Specification Checklist

For impact extension bar, record drive sizes, 1/2 inch lengths, 3/4 inch lengths. Confirm these details, the chosen finish and quantities against the quotation before approving supply.

Suitable Tool Assortments

Accessory assortments organized by 1/2, 3/4 or 1 inch drive and working reach.

Configuration Question

Is every listed length offered for every drive?

No. Use the drive-by-length table to select a confirmed combination.

Wild King Product Enquiries

Contact Wild King about impact extension bar – 1/2, 3/4 & 1 inch, 75–400 mm. Include your required configuration, order quantity and packaging needs so the inquiry can be reviewed against this product range.

Product Image Guide

Impact extension bar 75 400mm - complete drive and length range

Impact Extension Bar – 1/2, 3/4 & 1 Inch, 75–400 mm. Additional gallery views show the available configurations and connection details.

Before You Order

Straight socket extension bars with a broad drive and length selection. Choose each combination from the specification table; the family photograph illustrates options rather than a fixed multi-piece set.

Request a Product Quote

Send the selected impact extension bar specification through the enquiry form below. Include any access or storage dimensions that affect your choice.

Leave Your Message