21 × 24 mm Wheel Nut Socket Wrench – 350 mm
Wheel nut socket wrench: Product Overview
A defined 21 × 24 mm pair
The two metric figures refer to the fixed opening at each end. One end fits a 21 mm fastener, while the other fits a 24 mm fastener. Check the required nut size before using either end. The wrench does not adjust between these measurements, and a close size should not replace an exact fit. For a vehicle kit, compare the pair with the vehicle service information. For workshop stock, label the tool by both sizes so users can identify it quickly.
Wheel nut socket wrench dimensions
A 350 mm body gives this version a defined overall format for storage planning and tool comparisons. However, body length does not state socket depth or outside diameter. Those dimensions still matter if the nut sits in a narrow wheel recess or on a projecting stud. Request them when clearance is critical. Also check the space available for a turning bar. A tool may fit inside a storage compartment yet need more room around the wheel during actual operation.
Carbon steel and silver appearance
The detailed specification identifies 45# carbon steel for this model. The photographs selected for this page show a silver surface rather than a black version. Confirm the exact surface treatment in the final quotation if coating consistency matters to your assortment. A bright appearance alone should not be interpreted as stainless steel. Keep material grade, surface finish and dimensions as separate purchasing fields. This makes it easier to compare the supplied item with an existing tool or an agreed sample.
Manual turning through the cross hole
A compatible bar passes through the intended transverse hole to provide leverage. Confirm its fit and the required supply arrangement before ordering. The bar should allow a controlled hand position without striking nearby components. Seat the socket fully on the fastener before applying force, and follow the specification for the selected tool. The wrench is a manual double-ended design. It is not a ratchet, and the socket opening does not form a square-drive connection for a powered impact wrench.
Fit the tool to a known kit requirement
A defined 21 × 24 mm pair can simplify replacement purchasing when the existing vehicle tool uses those same sizes. Record the body length, storage limits and turning-bar arrangement along with the metric pair. If your customers need other pairs or handle shapes, compare the wider Wheel Nut Socket. Keep this 350 mm version distinct in the catalog so its dimensions do not become mixed with similar-looking wrenches from the broader range.
Service checks before and after use
Follow the vehicle manufacturer’s wheel-service procedure and support the vehicle correctly. Inspect both socket ends for rounding, cracks or distortion before fitting the wrench. Apply controlled manual force and avoid extending the turning bar with a pipe. For final installation, follow the specified sequence and use the appropriate torque-checking method. Afterward, wipe the tool clean and remove debris from the openings and cross hole. Store it dry, and investigate any damaged area before returning it to a shared kit.
Request this specific wrench
Tell Wild King that you require the 21 × 24 mm wheel nut socket wrench with a 350 mm overall length. Include the quantity, required finish and whether a matching turning bar must accompany each tool. If socket depth or outside diameter affects the fit, add those limits to the inquiry. Confirm the carbon steel specification and final package contents against the quotation. A clear request keeps the delivered product aligned with the particular pair and body length described on this page.
Key Features
- Socket pair: 21 × 24 mm
- Overall length: 350 mm
- Specified material: 45# carbon steel
Technical Specifications
| Socket pair | 21 × 24 mm |
|---|---|
| Overall length | 350 mm |
| Specified material | 45# carbon steel |
| Photographed appearance | Silver; confirm exact surface treatment |
| Design | Straight double-ended manual socket wrench |
| Turning bar | Confirm fit and whether supplied |
Design and Connection Details
Selection and Use
Order Specification Checklist
Suitable Tool Assortments
Configuration Question
Does the silver appearance mean stainless steel?
No. The detailed specification identifies 45# carbon steel. Confirm the surface treatment separately.
Wild King Product Enquiries
Product Image Guide
21 × 24 mm Wheel Nut Socket Wrench – 350 mm. Additional gallery views show the available configurations and connection details.